Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 260-0501-05 — Canon iR Advance C7565i

Code: 260-0501-05

Description: Power supply error
Causes: The 5 V supply to the sensor was not detected. (Blowout of FU3 and 5 on the DC Controller PCB)
Remedy: [Related parts] R1.00 - Harnesses connecting from the DC Controller PCB (UN2/J1240 and J1242) to the Drawer Unit (J8050) to the ITB Relay PCB and ITB Drive Roller Speed Detection PCB 1 and 2 (UN28/J2700, UN16/J7318 and UN17/J7319) - Harness between the ITB Relay PCB (UN28/J2704) and the ITB HP Sensor (PS5/J7528) - Harness connecting from the ITB Relay PCB (UN28/J2701) to the Steering Drive HP Sensor and Primary Transfer Roller Detachment HP Sensor (PS3/J7416 and PS4/J7113) - Harness between the ITB Relay PCB (UN28/J2702) and the ITB Displacement Sensor (PS2/ J7415) - ITB HP Sensor (PS5) - Steering Drive HP Sensor (PS3) - Primary Transfer Roller Detachment HP Sensor (PS4) - ITB Displacement Sensor (PS2) - ITB Relay PCB (UN28) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

← Xem tất cả mã lỗi Canon iR Advance C7565i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie