Code: 263-1151-05
Description: Power supply error
Causes: The 6.8 V supply to the Toner Density Sensor was not detected.
Remedy: [Related parts] R1.00 - Harness connecting from the Developing Assembly Control PCB (UN96/J1305) to the Toner Density Sensor (Y and M) (TS2/J8944 and TS3/J9014) - Harness connecting from the Developing Assembly Control PCB (UN96/J1309) to the Toner Density Sensor (C and Bk) (TS4/J9015 and TS1/J9016) - Toner Density Sensor (Y, M, C and Bk) (TS2, TS3, TS4 and TS1) - Developing Assembly Control PCB (UN96) [Remedy] Check/replace the related harness/cable, connector and parts.