Code: 542-8081-02
Description: Time out error by the tray 2 foreign matter detection (Finisher-X1)
Causes: The tray2 does not return to home position when the tray2 Shift Motor has been driven for 20 seconds at the down start of the tray2. The tray2 does not come off the tray2 Area Sensor at the same area when the tray2 Shift Motor has been driven for 4 seconds at the down start of tray2.
Remedy: [Related parts] - Harnesses from the Tray 2 Area Sensors (S125/S126/S127) to the Finisher Controller PCB - Harnesses from the Tray 2 Shift Motor (M217) to the Finisher Controller PCB - Tray 2 Area Sensors (S125/S126/S127) - Tray 2 Shift Motor (M217) - Finisher Controller PCB (PBA101) [Remedy] - If there is the foreign matter under the tray 2, remove it. - Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Finisher Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.