Code: 569-8001-02
Description: a. Error in the Upper Stopper Motor (Paper Folding Unit-J1) b. Upper Stopper Motor failed to go through HP (Document Insertion / Folding Unit-K1)
Causes: a. The Upper Stopper Motor failed to move from the Upper Stopper HP Sensor position after the Upper Stopper Motor drives for the specified pulse. b. The Upper Stopper Sensor failed to be OFF despite the drive of specified pulse in the case that the Upper Stopper Motor started to be driven while the Upper Stopper Sensor was ON.
Remedy: a. Paper Folding Unit-J1 [Related parts] -Harnesses from the Paper Folding Unit Controller PCB to the Upper Stopper HP Sensor (S23). -Harnesses from the Paper Folding Unit Controller PCB to the Upper Stopper Motor (M8). -Upper Stopper HP Sensor (S23) -Upper Stopper Motor (M8) -Paper Folding Unit Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Paper Folding Unit Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual. b. Document Insertion / Folding Unit-K1 [Related parts] - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the Upper Stopper Sensor (S16) - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the Upper Stopper Motor (M7) - Inserter/Folder ContRoller PCB (PCB2) - Upper Stopper Sensor (S16) - Upper Stopper Motor (M7) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] - When replacing the Inserter/Folder ContRoller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.