Code: 56A-8001-02
Description: Error in the C-fold Stopper MError in the C-fold Stopper Motor (Paper Folding Unit-J1) C Fold Stopper Motor failed to go through HP (Document Insertion / Folding Unit-K1)otor (Paper Folding Unit-J1) C Fold Stopper Motor failed to go through HP (Document Insertion / Folding Unit-K1)
Causes: a. The C-fold Stopper failed to move from the C-fold Stopper HP Sensor position after the C-fold Stopper Motor drives for the specified pulse. b. The C Fold Stopper Sensor failed to be OFF despite the drive of specified pulse in the case that the C Fold Stopper Motor started to be driven while the C Fold Stopper Sensor was ON.
Remedy: a. Paper Folding Unit-J1 [Related parts] -Harnesses from the Paper Folding Unit Controller PCB to the C-fold Stopper HP Sensor (S24). -Harnesses from the Paper Folding Unit Controller PCB to the C-fold Stopper Motor (M9). -C-fold Stopper HP Sensor (S24) -C-fold Stopper Motor (M9) -Paper Folding Unit Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Paper Folding Unit Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual. b. Document Insertion / Folding Unit-K1 [Related parts] - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the C Fold Stopper Sensor (S17) - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the C Fold Stopper Motor (M8) - Inserter/Folder ContRoller PCB (PCB2) - C Fold Stopper Sensor (S17) - C Fold Stopper Motor (M8) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] - When replacing the Inserter/Folder ContRoller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.