Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 263-1530-05 — Canon iR Advance C7570i

Code: 263-1530-05

Description: Power supply error
Causes: The 5 V supply to the ITB Belt Drive Motor and sensors were not detected.
Remedy: [Related parts] R1.00 - Harnesses connecting the DC Controller PCB (UN2/J1242), the Drawer Unit (J8050) and the ITB Drive Motor (M3/J7518) - Harness connecting from the DC Controller PCB (UN2/J1247) to the Hopper Toner Level Sensor (Y and M), Toner Container Phase Sensor (Y and M) and Toner Feed Screw Rotation Sensor (Y and M) (TS6/J7121, TS7/J7124, PS81/J7123, PS82/J7126, PS12/J7418 and PS15/J7419) - Harness connecting from the DC Controller PCB (UN2/J1248) to the Hopper Toner Level Sensor (C and Bk), Toner Container Phase Sensor (C and Bk), Toner Feed Screw Rotation Sensor (C and Bk) and Toner Container Reciprocation HP Sensor (Bk) (TS8/J7127, TS5/J7136, PS83/J7129, PS84/J7139, PS18/J7420, PS9/J7417 and PS8/J1750) - Harness connecting from the DC Controller PCB (UN2/J1249) to the Toner Container Reciprocation HP Sensor (Y, M and C) (PS11/J1990, PS14/J1980 and PS17/J1970) - Related sensors - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

← Xem tất cả mã lỗi Canon iR Advance C7570i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie