Code: 56B-8002-02
Description: Error in the Folding Tray Motor (Paper Folding Unit-J1) C Fold Tray Motor failed to go through HP (Document Insertion / Folding Unit-K1)
Causes: a. The Folding Tray failed to return to the Folding Tray HP Sensor position after the Folding Tray Motor drives for the specified pulse. b. The C Fold Tray Motor Sensor failed to be ON despite the drive of specified pulse in the case that the C Fold Tray Motor started to be driven while the C Fold Tray Motor Sensor was OFF.
Remedy: a. Paper Folding Unit-J1 [Related parts] -Harnesses from the Paper Folding Unit Controller PCB to the Fold Tray HP Sensor (S28). -Harnesses from the Paper Folding Unit Controller PCB to the Folding Tray Motor (M7). -Fold Tray HP Sensor (S28) -Folding Tray Motor (M7) -Paper Folding Unit Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Paper Folding Unit Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual. b. Document Insertion / Folding Unit-K1 [Related parts] - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the C Fold Tray Motor Sensor (S19) - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the C Fold Tray Motor (M6) - Inserter/Folder ContRoller PCB (PCB2) - C Fold Tray Motor Sensor (S19) - C Fold Tray Motor (M6) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] - When replacing the Inserter/Folder ContRoller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.