Code: E022-0001
Description: Drum cleaning / waste toner feed drive motor error. The lock signal of the drum cleaning/waste toner feed drive motor (M30) cannot be detected within a specified period. Connector disconnected, breaking (shorting) Failure of the drum cleaning unit (Overload) Failure of the waste toner feed screw (Overload) Failure of the DC controller interface PCB (Fuse (FU5 burns)) Failure of the drum cleaning/waste toner feed drive motor
Remedy: 1. Check the connection between the drum cleaning/ waste toner feed drive motor and the DC controller interface PCB (UN2). (Connection of the connector, Breaking (shorting)) Motor side: J7538/J8243, PCB side: J1227/J8036 2. Clean the screw in the drum cleaning unit (Bk), or replace the unit. Remove toner clog with the feed screw. 3. Clean the waste toner feed pipe unit, or replace the unit. Remove toner clog with the feed screw. 4. Replace the DC controller interface PCB (UN2). 5. Replace the drum cleaning/waste toner feed drive motor.