Code: 143
Description: SBU auto adjust error
Automatic adjustment of the SBU fails when the machine is switched on.
Automatic adjustment of the SBU fails when the machine is switched on.
Causes: • Exposure lamp defective
• Exposure lamp regulator defective
• Harness between exposure lamp and lamp regulator is disconnected
• White plate installed incorrectly or is dirty
• Scanning mirrors of the exposure unit are dirty or out of position
• SBU board defective
• VIB board defective.
• Harness between SBU, VIB disconnected
• Harness between VIB, BCU disconnected
• Exposure lamp regulator defective
• Harness between exposure lamp and lamp regulator is disconnected
• White plate installed incorrectly or is dirty
• Scanning mirrors of the exposure unit are dirty or out of position
• SBU board defective
• VIB board defective.
• Harness between SBU, VIB disconnected
• Harness between VIB, BCU disconnected