Description: Gripper Motor (M7) clock error
When the Gripper Motor (M7) was operated, the Gripper Encoder Sensor (S8) detected rotation of 400 clocks or more.
Remedy: 1. Check the connector connection of the Gripper Encoder Sensor (S8) or the Gripper Motor (M7). 2. Check for open circuit of the Harness of the Gripper Encoder Sensor (S8) or the Gripper Motor (M7). 3. Replace the Gripper Encoder Sensor (S8). 4. Replace the Gripper Motor (M7). 5. Replace the Finisher Controller PCB.