Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E202-0002 — Canon iR2250

Code: E202-0002

Description: The scanner home position sensor does not go ON when the scanner is moved reverse 450 mm
Causes: The scanner home position sensor (PS400) is faulty. The scanner motor (M400) is faulty. The reader controller PCB is faulty.
Remedy: 1. State Does the scanner operate when the power is turned on? NO: See 4.2.9 The No. 1 mirror base does not operate. 2. Scanner home position sensor (PS400), Reader controller PCB Move the No. 1 mirror base by hand from home position. Does the output of the scanner home position sensor change? (J405-2 on the reader controller PCB is 5 V (in HP) or 0V (away from HP)) NO: Replace the sensor. YES: Replace the rear controller PCB.

← Xem tất cả mã lỗi Canon iR2250

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie