Description: The scanner home position sensor does not go ON when the scanner is moved reverse 450 mm
Causes: The scanner home position sensor (PS400) is faulty. The scanner motor (M400) is faulty. The reader controller PCB is faulty.
Remedy: 1. State Does the scanner operate when the power is turned on? NO: See 4.2.9 The No. 1 mirror base does not operate. 2. Scanner home position sensor (PS400), Reader controller PCB Move the No. 1 mirror base by hand from home position. Does the output of the scanner home position sensor change? (J405-2 on the reader controller PCB is 5 V (in HP) or 0V (away from HP)) NO: Replace the sensor. YES: Replace the rear controller PCB.