Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E110-0000 — Canon iR2850

Code: E110-0000

Description: The motor ready signal does not arrive within 15 sec after the laser scanner motor drive signal is generated
Causes: The wiring is faulty (short circuit, open circuit, disconnection). The laser scanner motor (M10) is faulty. The main power supply PCB is faulty. The DC controller PCB is faulty.
Remedy: 1. Connector Are the connector (J312) on the DC controller PCB and the relay connector connected securely? NO: Connect the connectors securely. 2. Main power supply PCB During printing, does the voltage between J204-1 (+) and J204-2 (-) on the main power supply PCB change from 0 to about 24 V? NO: Replace the main power supply PCB. 3. Laser scanner unit, DC controller PCB Try replacing the laser scanner unit. Is the problem corrected? YES: End. NO: Replace the DC controller PCB.

← Xem tất cả mã lỗi Canon iR2850

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie