Code: SC310
Description: Drum Potential Sensor Error 1
During drum potential sensor calibration, the output voltages from the drum potential sensor are not within specifications while .200V then .700V are applied to the drum. NOTE: After this SC is issued, the grid voltage changes to the value set with SP2001-001 (Charge Corona Bias Adjustment) and LD power changes to the value set with SP2103 (LD Power Adjustment).
During drum potential sensor calibration, the output voltages from the drum potential sensor are not within specifications while .200V then .700V are applied to the drum. NOTE: After this SC is issued, the grid voltage changes to the value set with SP2001-001 (Charge Corona Bias Adjustment) and LD power changes to the value set with SP2103 (LD Power Adjustment).
Causes: • Drum potential sensor defective • Poor connection between the drum potential sensor and the BCU • Drum potential sensor defective • IOB defective • Poor drum ground connection • CBG power pack defective