Code: SC315
Description: Drum Potential Sensor Error 6 (Vd Abnormal)
When adjusting Vd for the unexposed drum during process control initialization, Vd does not reach the voltage set for SP2001 007 ± 20 V even if Vg has been adjusted 5 times. SP2001 007 (Charge Corona Bias Adjustment . Vd) adjusts the target Vd voltage for process control. Range/Default/Step: [700~1000 / 800 / 5 V]. NOTE: If the Vd adjustment fails, the machine uses the charge grid voltage Vg for the previous adjustment. In this condition, normal ID sensor pattern detection is done.
When adjusting Vd for the unexposed drum during process control initialization, Vd does not reach the voltage set for SP2001 007 ± 20 V even if Vg has been adjusted 5 times. SP2001 007 (Charge Corona Bias Adjustment . Vd) adjusts the target Vd voltage for process control. Range/Default/Step: [700~1000 / 800 / 5 V]. NOTE: If the Vd adjustment fails, the machine uses the charge grid voltage Vg for the previous adjustment. In this condition, normal ID sensor pattern detection is done.
Causes: • Drum potential sensor defective • Drum potential sensor harness defective • Drum potential sensor connector defective • IOB defective • Drum unit connector defective • CBG power pack defective