Code: SC316
Description: Drum Potential Sensor Error 7 (Vh abnormal)
One of the following occurred: • When adjusting the drum potential (Vh) for the process control initial setting, the drum potential sensor detects Vh is not within the range .260 + .Vlref +- 20V. In this case, the auto process control value is used. • During retries for LD power modulation to adjust the amount of light, the adjustment was out of range (-70 to +185). In this case, the value of the setting is used.
One of the following occurred: • When adjusting the drum potential (Vh) for the process control initial setting, the drum potential sensor detects Vh is not within the range .260 + .Vlref +- 20V. In this case, the auto process control value is used. • During retries for LD power modulation to adjust the amount of light, the adjustment was out of range (-70 to +185). In this case, the value of the setting is used.
Causes: • Drum potential sensor defective • IOB defective • Drum unit connector defective • LDB board defective • Poor drum ground connection • Drum worn • Laser optics need cleaning