Code: SC352
Description: ID Sensor Error 3
At the ID sensor pattern check, the ID sensor pattern edge voltage is not detected at 2.5 V for 1.5 seconds. NOTE: 1) Vsp is the ID sensor output after checking the ID sensor pattern image. 2) The SC code is not displayed; only the logging data is incremented. 3) Regarding toner supply, if an abnormal condition is detected, then only the toner density sensor output is used, without an updated Vref setting. 4) After an abnormal condition is detected, SP3103 (ID Sensor Output Display) shows Vsp = Vsg (or 5.0V).
At the ID sensor pattern check, the ID sensor pattern edge voltage is not detected at 2.5 V for 1.5 seconds. NOTE: 1) Vsp is the ID sensor output after checking the ID sensor pattern image. 2) The SC code is not displayed; only the logging data is incremented. 3) Regarding toner supply, if an abnormal condition is detected, then only the toner density sensor output is used, without an updated Vref setting. 4) After an abnormal condition is detected, SP3103 (ID Sensor Output Display) shows Vsp = Vsg (or 5.0V).
Causes: • ID sensor defective • ID sensor harness defective • ID sensor connector defective • IOB defective • LD unit defective • BCU defective • CBG power pack defective • Dirty ID sensor