Code: E054
Description: The duplex feed roller drive mechanism of the duplex unit is faulty.
• The duplex driver PCB detects that the horizontal registration guide exceeded its maximum travel distance after the detection of the horizontal registration guide home position has started.
• The duplex driver PCB detects that the horizontal registration guide exceeded its maximum travel distance after the detection of the horizontal registration guide home position has started.
Remedy: Duplex feed roller 1 home position sensor lever 1) Is the duplex feed roller 1 home position sensor lever damaged? YES: Replace the lever. Duplex feed roller gear 2) Is the duplex feed roller gear worn or chipped? YES: Replace the worn/chipped gear. Duplex driver PCB 3) Are connectors J2003, J2004, and J2007 on the duplex driver PCB connected securely? NO: Connect them securely. Duplex feed roller 1 home position sensor 4) Try replacing the duplex feed roller 1 home potion sensor. Is the problem corrected? YES: End. Duplex feed clutch 5) Disconnect connector J2003 of the duplex feed clutch, and measure the resistance between connectors J2003-1 and J2003-2 on the harness side. Is it about 140 Ohm Duplex motor, Duplex motor driver PCB 6) Try replacing the duplex motor. Is the problem corrected? NO: Replace the duplex driver PCB.