Code: E100
Description: The BD of the scanner unit is faulty.
• The scanner motor fails to reach a specific revolution within 10 sec after it has started to rotate. • The BD PCB detects an error for 2.5 sec or more after the scanner motor has started to rotate at a specific speed.
• The scanner motor fails to reach a specific revolution within 10 sec after it has started to rotate. • The BD PCB detects an error for 2.5 sec or more after the scanner motor has started to rotate at a specific speed.
Remedy: Condensation 1) Leave the machine alone for 10 to 20 min. Is the problem corrected? YES: End. BD signal line connector 2) Are connector J6 on the BD PCB and connector J206 on the DC controller PCB connected securely? NO: Connect them securely. Laser driver signal line connector 3) Are connector J1001 on the laser driver PCB and connector J202 on the DC controller PCB connected securely? NO: Connect the connectors securely. Laser scanner assembly, DC controller PCB 4) Try replacing the laser scanner assembly. Is the problem corrected? YES: End. NO: Replace the DC controller PCB.