Code: E202
Description: The scanner home position cannot be detected. • The original scanner home position sensor (PS101) is faulty. • The original scanner motor (PM1)/ original scanner motor driver PCB is faulty.
• The scanner fails to return to the home position after it has started to operate.
• The scanner fails to return to the home position after it has started to operate.
Remedy: 1) When E202 is indicated, is the scanner at home position? NO: See “The scanner fails to move forward/in reverse?” Original scanner home position sensor (PS1) 2) When the scanner is over PS1, is a 5-VDC output present at J117B- 8 on the reader controller PCB? NO: Check the wiring from the reader controller PCB to PS1; if normal, replace PS1. Wiring 3) Check the wiring from J113 of the reader controller PCB to J303/ 302 on the original scanner motor driver PCB. Is there a fault? YES: Correct the wiring. Original scanner motor driver PCB 4) Try replacing the original scanner motor driver PCB. Is the problem corrected? YES: End. Original scanner motor (PM1), Reader controller PCB 5) Try replacing the original scanner motor (PM1). Is the problem corrected? YES: End. NO: Replace the reader controller PCB.