Code: E606
Description: The HDD is faulty.
• The HDD cannot be recognized normally at power-on. • An error occurs while writing to or reading from the HDD.B?
• The HDD cannot be recognized normally at power-on. • An error occurs while writing to or reading from the HDD.B?
Remedy: Connector (poor contact) 1) Are connectors J701 and J702 of the HDD and connectors J306 and J307 of the relay PCB connected securely? NO: Connect the connectors securely. Relay PCB 2) Is connector J301 of the relay PCB and J1017 of the system controller PCB connected securely? NO: Connect them securely. HDD, System controller PCB 3) Try replacing the HDD. Is the problem corrected? YES: End. NO: Replace the system controller PCB.