Code: E826
Description: A multifeeder cooling fan error occurs.
• An error occurs in the rotation of the multifeeder tray fan (FAN5).
• An error occurs in the rotation of the multifeeder tray fan (FAN5).
Remedy: Connector (poor contact) 1) Are connector J229 on the DC controller PCB and relay connectors J34 and J35 connected securely? NO: Connect the connectors securely. Multifeeder tray fan (FM5) 2) Disconnect J229 from the DC controller PCB. Does the voltage between connectors J229-1 (FAN5D) and J229-3 (GND) on the DC controller PCB change from 0 to bout 18 V immediately after the power switch is turned on? YES: Replace the multifeeder tray fan (FM5). NO: Replace the DC controller PCB.