Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E010-0000 — Canon iR3300

Code: E010-0000

Description: After the main motor drive signal is generated, the clock signal does to arrive within 1.3 sec
Causes: The main motor (M2) is faulty. the DC controller PCB is faulty.
Remedy: 1. Connector Is the connector of the main motor connected? NO: Connect the connector. 2. Main power supply PCB Is the drive voltage (24 V) of the main motor supplied by the main power supply PCB? Main power supply PCB: between J202-1 (24VU1-SW) and J202-2 (OVU1) NO: Replace the main power supply PCB. 3. Main controller (M2), DC controller PCB Press the Start key. Is the lock signal of the main motor present at the connector J308 on the DC controller PCB? Lock signal: J318-A10 (MM_LOCK) YES: Replace the main motor. NO: Check the wiring; if normal, replace the DC controller PCB.

← Xem tất cả mã lỗi Canon iR3300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie