Description: Finisher Positioning Roller Error (B478 only)
The positioning roller HP sensor in the finisher is not activated within the prescribed length of time (340 pulses) for two counts.
Causes: If powering the machine off/on does not solve the problem: • Positioning roller HP sensor defective or disconnected • Stapler transport motor or positioning roller solenoid defective • Finisher main control board defective • Finisher control board defective • Jam NOTE: 1) If the motor operates, then check the positioning roller HP sensor. 2) If the motor does not operate, then check the motor and the finisher control board. 3) If the harness connections are secure, the motor may be defective.