Description: Finisher Jogger Motor Error
The jogger HP sensor is not activated within the prescribed length of time.
Causes: • Jogger HP sensor (B478)/jogger fence HP sensor (B468)/shift jogger HP sensor (optional jogger unit) disconnected or defective • Jogger motor (B478)/jogger fence motor (B468)/shift jogger motor (optional jogger unit) disconnected or defective • Finisher main control board defective • Overload NOTE: 1) If cycling the machine off/on does not solve the problem, then the HP sensor may be defective. 2) Be sure to check all harness connections. 3) If the motor operates, then the HP sensor is defective. 4) If the motor does not operate, then the motor or the finisher main control board is defective. 5) Make sure that the jogger unit is not overloaded.