Code: E248-0002
Description: The data read does not match the data written to EEPROM
Causes: The EEPROM (IC403) of the reader controller PCB is faulty. The reader controller PCB is faulty.
Remedy: 1. Execute the following in service mode: COPIER>FUNCTION>CLEAR>CON. Is the proem corrected? YES: End. After executing the service mode, be sure to enter the service mode data newly. 2. EE-PROM, Reader controller PCB Try replacing the EE-PROM. Is the problem corrected? YES: End. After replacement, be sure to enter the service mode data newly. NO: Replace the rear controller PCB. After replacement, be sure to enter the service mode date newly.