Code: SC542
Description: Fusing Temperature Warm-up Error
One of the following occurred: • Hot roller did not reach target operation temperature within 6 minutes after the machine was powered or 6 minutes after the doors were closed. • Fusing temperature rose only 5oC toward the fusing temperature within 20 s after the machine was powered on, or after the doors were closed. • Fusing temperature rose only 5oC toward the fusing temperature within 25 s of the start of hot roller rotation.
One of the following occurred: • Hot roller did not reach target operation temperature within 6 minutes after the machine was powered or 6 minutes after the doors were closed. • Fusing temperature rose only 5oC toward the fusing temperature within 20 s after the machine was powered on, or after the doors were closed. • Fusing temperature rose only 5oC toward the fusing temperature within 25 s of the start of hot roller rotation.
Causes: • Fusing lamp(s) disconnected • Thermistor out of position