Code: SC222
Description: Laser Synchronization Detector Error 1: Y Leading Edge: LD0
While the polygon motor is rotating normally, no synchronizing detection signal is output for LD0 yellow, leading edge, even after the laser diode has been firing for 2 sec.
While the polygon motor is rotating normally, no synchronizing detection signal is output for LD0 yellow, leading edge, even after the laser diode has been firing for 2 sec.
Causes: • Harness between the laser synchronizing detector and I/F unit is disconnected, defective • Laser synchronizing detector defective • GAVD on the BICU defective • LD driver board defective • LDB defective • BCU defective • Check board connections, replace