Code: E078
Display: E078
Description: Secondary transfer roller engaging mechanism abnormality
Remedy: 1) Poor contact in the roller engaging sensor connector Action: Reconnect the J714 for the roller engaging sensor and J115 on the DC controller PCB. 2) Poor contact in the roller engaging clutch connector Action: Reconnect the J114 on the DC controller PCB. 3) Defective roller engaging clutch Action: Disconnect the J114 on the DC controller PCB. Measure resistance between the J114-2 and J114-1. If the result is not about 150 Om, replace the roller engaging clutch. 4) Defective spring for the engaging lever Action: If it is out of place, reset it properly. If it is deformed, replace it. 5) Defective engaging lever Action: Replace the secondary transfer roller or engaging lever. 6) Defective roller engaging cam Action: Replace the EP-87 drum cartridge. 7) Defective roller engaging sensor Action: Replace the main drive unit. 8) Defective DC controller PCB Action: Replace it.