Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E100 — Canon LBP3018

Code: E100

Description: Error in Scanner Unit
Causes: - At startup of the scanner, /BDI signal cannot be detected within 0.1 sec after forced acceleration of the scanner motor. - At startup of the scanner during activation of the scanner motor, the motor rotation exceeds the range of specified value (98.3 to 102.1%). - After startup of the scanner is correctly completed, /BDI signal exceeds the specified cycle 10 times consecutively.
Remedy: Check connectors on the scanner unit - Replace the scanner unit. - Replace the engine controller PCB

← Xem tất cả mã lỗi Canon LBP3018

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie