Code: 03
Display: "LOAD<MEDIA><SIZE> IN UPPER or LOAD<MEDIA><SIZE>IN LOWER
Description: when the specified cassette is loaded with paper.
Remedy: 1. Pull out the upper and lower cassettes, and install the specified cassette in the printer. If the lifter does not lift, perform step 5 and subsequent steps. 2. Damaged paper detection lever Action: Replace the defective lever. 3. Defective upper cassette paper-out sensor/lower cassette paper-out sensor Action: Replace the pick-up PCB. 4. The DC controller PCB is defective. Action: Replace the DC controller PCB. 5. Pick-up drive unit is damaged. Action: Remove the pick-up unit and replace any damaged parts. 6. The cassette pick-up solenoid is defective. Action: Remove the pick-up unit, and disconnect cassette pick-up solenoid connector J1203 from the pick-up PCB. Measure the resistance between connectors J1203- 1 and J1203-2 on the cable side. If it is not about 160W, replace the cassette pickup solenoid. 7. The pick-up PCB is defective. Action: Replace the pick-up PCB. 8. The DC controller PCB is defective. Action: Replace the DC controller PCB.