Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 10.3 — Canon LBP3260

Code: 10.3

Display: 10.3 ERROR FUSER CALL FOR SERVICE
Description: Fixing unit failure (abnormal high temperature)
Remedy: 1. The thermistor has shorted. Action: Turn the power OFF and remove the fixing unit. Measure the resistance between the fixing unit connector J50B-5 (FSRTH) and J50B-4 (GNDTH). The connector J50B is the upper terminal of the left connector. If the resistance is 1kom or less, check the wiring from connector J222 on the DC controller PCB to the thermistor. If it is normal, replace the thermistor. 2. The fixing unit drive circuit in the power supply is defective. Action: Replace the power supply. 3. The DC controller PCB is defective. Action: Replace the DC controller PCB.

← Xem tất cả mã lỗi Canon LBP3260

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie