Code: 12.2
Display: 12.2 ERROR MOTOR CALL FOR SERVICE
Description: Faulty main motor
Remedy: 1. The main motor drive signal line connectors are loose. Action: Reconnect connector J12 of the main motor and connector J218 on the DC controller PCB. 2. The door switch on the switch/sensor PCB is defective. Action: Remove connectors J205 and J221 on the DC controller PCB. If J205-3 (+24V) and J221-1 (+24VB) on the cable side do not conduct when the door switch (SW1401) is ON, replace the switch/sensor PCB. 3. The main motor is defective. Action: Use the printer driver tester to rotate the main motor. If it does not rotate, replace it. 4. The DC controller PCB is defective. Action: Replace the DC controller PCB.