Code: 13.1
Display: 13.1 ERROR FAM 1 CALL FOR SERVICE
Description: Electrical unit fan (FM3) failure
Remedy: 1. The FM3 drive signal line connector is loose. Action: Reconnect connector J210 on the DC controller PCB and connectors J12 and J13. 2. The electrical unit fan is defective. Action: Disconnect connector J210 on the DC controller PCB. Turn the power switch ON and measure the voltage between connector J210-1 (FAN3D) and J210-3 (GND) on the DC controller PCB. If the voltage changes from 0 to more than 18V, replace the electrical unit fan. 3. The DC controller PCB is defective. Action: Replace the DC controller PCB.