Code: 13.2
Display: 13.2 ERROR FAM 2 CALL FOR SERVICE
Description: Power supply fan (FM2) failure
Remedy: 1. The FM2 drive signal line connector is loose. Action: Reconnect connector J216 on the DC controller PCB. 2. The power supply fan is defective. Action: Disconnect connector J216 on the DC controller PCB. Turn the power switch ON and measure the voltage between connector J216-1 (FAN2D) and J216-3 (GND) on the DC controller PCB. If the voltage changes from 0 to more than 18V, replace the power supply fan. 3. The DC controller PCB is defective. Action: Replace the DC controller PCB.