Code: 13.3
Display: 13.3 ERROR FAM 3 CALL FOR SERVICE
Description: Fixing unit/scanner fan (FM1) failure
Remedy: 1. The FM1 drive signal line connector is loose. Action: Reconnect connector J208 on the DC controller PCB. 2. The fixing unit/scanner fan is defective. Action: Disconnect connector J208 on the DC controller PCB. Turn the power switch ON and measure the voltage between connector J208-1 (FAN1D) and J208-3 (GND) on the DC controller PCB. If the voltage changes from 0 to more than 18V, replace the fixing unit/scanner fan. 3. The DC controller PCB is defective. Action: Replace the DC controller PCB.