Code: 14.1
Display: 14.1 ERROR AUX TRAY CALL FOR SERVICE
Description: Lifting plate failure
Remedy: 1. Lifting plate drive unit parts are damaged. Action: Replace any damaged parts. 2. The lifting plate position sensor is defective. Action: Check the sensor state using the printer driver tester. If it is defective, replace the multi-purpose tray PCB. 3. The lifting plate solenoid is defective. Action: Disconnect lifting plate solenoid connector J1302. Measure the resistance between connector J1302-1 and J1302-2 on the cable side. If it is not about 160W, replace the lifting plate solenoid. 4. The DC controller PCB is defective. Action: Replace the DC controller PCB.