Code: 04
Display: PAPER JAM
Description: displayed and the printer does not enter a ready status although a paper jam has not been occurred.
Remedy: 1) The lever for the registration paper sensor is damaged/deformed or the spring is out of place. Action: If the lever or spring is damaged or deformed, replace the registration roller unit. If it is out of place, reset it properly. 2) The registration shutter is damaged/deformed or the spring is out of place. Action: If the registration shutter or spring is damaged/deformed, replace the registration shutter unit. If it is out of place, reset it properly. 3) Poor contact in the registration paper sensor connector Action: Reconnect the J107 on the DC controller PCB. 4) Defective registration paper sensor Action: Replace it. 5) Defective DC controller PCB Action: Replace it. 6) The option paper feed sensor lever is damaged/deformed or its spring is displaced. Action: If damage/deformation is found on the sensor lever or spring of the onto paper feed sensor, replace it. Or, if the sensor lever or the spring is displaced, put it back to its correct position. 7) The connector of the option paper feed sensor has poor contact. Action: Connect the connector J717 of the option paper feed sensor or the connector J2303 of the 250-sheet paper feeder driver PCB. 8) The option paper feed sensor is faulty. Action: Replace the option paper feed sensor. 9) The 250-sheet paper feed driver PCB is faulty. Action: Replace the 250-sheet paper feed driver PCB. 10) Poor contact in the fixing delivery paper sensor connector Action: Reconnect the J203 for the fixing delivery paper sensor, J201 for the fixing unit, and J119 on the DC controller PCB. 11) Defective fixing delivery paper sensor Action: Replace the lower fixing guide unit. 12) Defective DC controller PCB Action: Replace it.