Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E000 — Canon LBP5200

Code: E000

Display: E000
Description: Fixing Unit Failure (start-up failure)
Remedy: 1) Broken main thermistor Action: Measure resistance between J119-4 and J119-5 on the DC controller PCB. If the result is not within about 350 kÙ to 520 kÙ (at room temperature of 25 °C), check cables from the J201 for the fixing unit to J205 for the sub thermistor. If nothing is wrong with the cables, replace the fixing film unit. 2) Broken sub thermistor Action: Measure resistance between J119-2 and J119-3 on the DC controller PCB. If the result is not within about 360 K to 530 k (at room temperature of 25 °C), check cables from the J201 for the fixing unit and J205 for the sub thermistor. If nothing is wrong with the cables, replace the fixing film unit. 3) Broken fixing heater Action: If the connector for the power supply unit between J302-1 and J302-3 has no continuity, replace the fixing film unit. 4) Poor contact in connectors Action: Reconnect the J119 on the DC controller, J302 for the power supply unit, and J201 for the fixing unit. 5) Defective power supply unit Action: Replace it. 6) Defective DC controller PCB Action: Replace it.

← Xem tất cả mã lỗi Canon LBP5200

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie