Code: E100
Display: E100
Description: Optical Unit (Laser/scanner Unit) Failure
Remedy: 1) Poor contact in the laser drive signal line connector Action: Reconnect the J11 on the laser driver PCB and J102 on the DC controller PCB. 2) Poor contact in the BD detection line connector Action: Reconnect the J131 on the BD PCB and J103 on the DC controller PCB. 3) Poor contact in the scanner motor connector Action: Reconnect the J221 for the scanner motor and J103 on the DC controller PCB. 4) Defective laser/scanner unit Action: Replace it. 5) Defective DC controller PCB Action: Replace it.