Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E015-0000 — Canon LBP7780Cx

Code: E015-0000

Description: Error in the developing disengagement movement
Causes: Developing disengagement motor failure • The standard flag was not detected even when driving was performed for 1000ms after rotation of the motor. • The standard flag was not detected even when driving was performed for 8000ms at the time of switching from the full-color position to "all disengagement". • The standard flag was not detected even when driving was performed for 3000ms at the time of switching from the monochrome position to "all disengagement".
Remedy: • Reconnect the connector J518 of the developing disengagement motor, the connector J1005 on the driver PCB, and the connector J91 on the DC controller PCB. • Check the condition of the developing disengagement sensor in the sensor monitor mode. If a failure is found, replace the developing disengagement sensor assembly. • Execute the developing assembly engagement/disengagement drive test in the actuator drive mode. If the developing assembly does not perform engagement/disengagement, replace the developing disengagement motor.

← Xem tất cả mã lỗi Canon LBP7780Cx

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie