Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E015-0002 — Canon MF635Cx

Code: E015-0002

Description: Cassette 2 lift-up error
Causes: After lift-up of the Lifting Plate of the 1-Cassette Unit started, ON status of the Lifter Sensor of the 1-Cassette Unit was not detected within the specified period of time.
Remedy: 1. While the cassette of the 1-Cassette Unit is removed, turn ON the power and insert the cassette, then check the operation sound of the motor. When there is operation sound of the motor, check if the Lifting Plate has been lifted up. When the Lifting Plate has been lifted up: 1-1. Check that the Lifter Sensor of the Cassette Unit is properly installed. 1-2. Check the harness/connector between the Engine Controller PCB and the Lifter Sensor. 1-3. Replace the Lifter Sensor. 1-4. Replace the Cassette Feeder Driver PCB. 1-5. Replace the Engine Controller PCB. When the Lifting Plate has not been lifted up: 2-1. Check the condition of the gear of the Cassette Unit (missing teeth, swing). 2-2. Check the harness/connector between the Engine Controller PCB and the Lifter Solenoid of the Cassette Unit. 2-3. Replace the Lifter Solenoid. 2-4. Replace the Pickup Motor of the Cassette Unit. 2-5. Replace the Cassette Feeder Driver PCB. 2-6. Replace the Engine Controller PCB. When there is no operation sound of the motor, check the followings: 3-1. Check the harness/connector between the Engine Controller PCB and the Pickup Motor of the Cassette Unit. 3-2. Check the condition of the gear at the Cassette Unit side (missing teeth, swing). 3-3. Replace the Pickup Motor. 3-4. Replace the Cassette Feeder Driver PCB. 3-5. Replace the Engine Controller PCB.

← Xem tất cả mã lỗi Canon MF635Cx

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie