Code: SC303
Description: Charge corona wire cleaner error
1) Wire cleaner motor feedback voltage of less than 0.1 V was detected for more than 1s. 2) Corona wire cleaning did not complete within 80 s. 3) Charge wire cleaner did not return to the home position. 4) Cleaner does not move from the home position.
1) Wire cleaner motor feedback voltage of less than 0.1 V was detected for more than 1s. 2) Corona wire cleaning did not complete within 80 s. 3) Charge wire cleaner did not return to the home position. 4) Cleaner does not move from the home position.
Causes: Wire cleaner motor connector disconnected. Wire cleaner motor connector disconnected. Wire cleaner motor is operating without a load. Wire cleaner stops due to an overload. Wire cleaner motor drive circuit malfunction.