Code: 840.01, 840.02
Description: 840.01 Scanner disabled The scanner is disabled and can’t be used. 840.02 Scanner auto disabled The scanner is disabled and can’t be used.
Remedy: 1 POR the machine into configuration mode. Go to the disable scanner menu item. See “Disable Scanner”. Touch “Enable ADF/FB -Enabled and press Submit to save the change. POR the MFP to operating mode. Try running a copy from the ADF and flatbed. Did the 840.xx error recur? Go to step 2. Stop. Problem resolved. 2 Re-enter Configuration mode, scroll to and select the Disable Scanner menu item. Does the screen display ADF Disabled or Auto Disabled? Go to step 3. Go to step 8. 3 Check the ADF cable to ensure it is prpoerly connected to the ADF. Is the cable properly connected? Go to step 5. Go to step 4. 4 Properly connect the cable to the ADF unit and controller board. POR the machine into configuration mode. Go to the disable scanner menu item. See “Disable Scanner”. Touch “Enable ADF/FB -Enabled and press Submit to save the change. POR the MFP to operating mode. Try running a copy from the ADF and flatbed. Did the 840.xx error recur? Go to step 5. Stop. Problem solved. 5 Check the continuity on the ADF cable. Is there continuity? Go to step 7 Go to step 6. 6 Replace the ADF cable. POR the machine into configuration mode. Go to the disable scanner menu item. See “Disable Scanner”. Touch “Enable ADF/FB -Enabled and press Submit to save the change. POR the MFP to operating mode. Try running a copy from the ADF and flatbed. Did the 840.xx error recur? Go to step 7. Stop. Problem solved. 7 Replace the ADF unit. See “ADF assembly removal”. POR the machine into configuration mode. Go to the disable scanner menu item. See “Disable Scanner”. Touch “Enable ADF/FB -Enabled and press Submit to save the change. POR the MFP to operating mode. Run a copy from the ADF. Did the 840.xx error recur? Go to step 8. Stop. Problem solved. 8 Inspect J15, J2, 1 and J5 on the controller board. Are the connections properly connected? Go to step 10. Go to step 9. 9 Properly connect all the connections. Did the 840.xx error recur? Go to step 10. Stop Problem solved. 10 Replace the flatbed unit. See “Flatbed removal”. POR the machine into configuration mode. Go to the disable scanner menu item. See “Disable Scanner”. Touch “Enable ADF/FB -Enabled and press Submit to save the change. POR the MFP to operating mode. Run a copy from the flatbed. Did the 840.xx error recur? Go to step 11 Stop. Problem solved. 11 Replace the controller board. See “Controller card removal”. Did this fix the problem? Problem solved. Contact second-level support.