Code: 936.xx, 937.00
Description: 936.xx Transport motor initial lock failure 937.00 Main transport motor lost lock
Remedy: Replace the main motor gear drive. Main motor cable LVPS/HVPS Controller card Verify +24 V dc at J19, pins 8 and 9, and +5 V dc at pin 6 (controller card). Verify ground at pins 4 and 5 for both the card and cable. • If these voltages are correct, check the main motor cable for continuity. - Remove rear cover to access connector on motor. - If continuity exists on each wire, call next level of service. - If continuity does not exist on one or more of the wires, replace the motor cable. • If these voltages are not correct, see the “LVPS/HVPS service check”, or replace the controller card. Note: The main motor is not a service part.