Code: 930.xx...935.xx
Description: 930.xx Wrong printhead installed. 931.xx No first hsync 932.xx Lost hsyncs 933.xx Mirror motor locked: No hsync received 935.xx Motor unable to reach operating speed
Remedy: Replace the printhead. Printhead Unplug the MFP. Disconnect the printhead cables from J13 and J12 on the controller card. Turn the MFP on. On the controller card, verify +24 V dc on pin 5 at J13 and +5 V dc on pin 7 at J12. Verify grounds on pin 4 at J13 and on pins 2, 6, and 8 at J12. • If voltages or grounds are incorrect, check the controller card. See “Controller card service check” for more information. • If voltages are correct, replace the printhead (cables are included).