Code: 12
Display: Paper Jam 0
Description: Paper was sensed at the paper tray empty sensor, but not at the manual bypass.
Remedy: • Go to the paper path diagram “Printer engine paper path/ paper jams” to see the region where a paper jam may occur. • Remove any obstructions and other paper debris. • Make sure the manual bypass sensor actuator is not broken, improperly installed or stuck with paper debris. • Perform the “Sensor test” to check proper operation of the sensor. • If the sensor works properly, the problem is likely associated with the system board. • If the paper path and sensor actuator are clear and working properly, and the problem persists, replace the HVPS/ LVPS. Note: This sensor is a component of the HVPS/LVPS.