Code: 13
Display: Paper Jam 1
Description: The fuser exit sensor sensed the leading edge of the page but never sensed the trailing edge.
Remedy: • Go to the paper path diagram “Printer engine paper path/ paper jams” to see the region where a paper jam may occur. • Remove any obstructions and other paper debris. • Perform the “Sensor test” to check proper operation of the sensor. • If the sensor works properly, the problem is likely associated with the system board. • Make sure the fuser exit sensor isn’t stuck with debris or improperly installed. • If the paper path and sensor actuator are clear and working properly, replace the HVPS/LVPS. Note: This sensor is a component of the HVPS/LVPS.