Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 14 — Lexmark X215 MFP

Code: 14

Display: Paper Jam 2
Description: Paper was sensed at the main paper feed/ toner cartridge present sensor, but not at the fuser exit sensor.
Remedy: • Go to the paper path diagram “Printer engine paper path/ paper jams” to see the region where a paper jam may occur. • Remove any obstructions and other paper debris. • Perform the “Sensor test” to check proper operation of the sensor. • If the sensor works properly, the problem is likely associated with the system board. • Make sure the fuser exit sensor actuator is not broken, improperly installed or stuck with paper debris. • If the paper path and sensor actuator are clear and working properly, and the problem persists, replace the HVPS/ LVPS. Note: This sensor is a component of the HVPS/LVPS.

← Xem tất cả mã lỗi Lexmark X215 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie