Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 930.xx...935.xx — Lexmark X364

Code: 930.xx...935.xx

Description: 930.xx Wrong printhead installed 931.xx No first hsync 932.xx Lost hsyncs 933.xx Mirror motor locked: No hsync received 935.xx Motor unable to reach operating speed
Remedy: Replace the printhead.
Note: New printhead must be aligned. See “Printhead assembly electronic adjustment”. Turn the printer off. Disconnect the printhead cables from J12 and J8 on the controller board. Turn the printer on with the front door closed. On the controller board, verify +5 V dc on pin 10 at J12 and +5 V dc on pins 1, 2, and 3 at J8. Verify grounds on pins 2, 4, and 7 at J12 and on pin 4 at J8. •If voltages or grounds are incorrect, then check the controller board. See “Controller board service check” for more information. •If voltages are correct, then replace the printhead (comes with cables).

← Xem tất cả mã lỗi Lexmark X364

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie